Food Rethermalizer/Bain Marie Heater, Electric, stainless steel front, silver-gray hammertone body, black base, 9kW, NSF, UL, UL EPH Classified, CSA, CE, Made in USA
- The Hatco FR is designed to be used with a Bain-Marie or food reconstitutor, to heat or hold foods at safe temperatures between 140°F and 190°F
- The FR mounts easily to the underside of a holding vessel, leaving the entire vessel area free. Water is continually circulated to avoid any “cool” spots.
- The unit controls water temperature from 140°F (60°C) to 190°F (88°C).
- The Hatco FR is shipped factory assembled, pre-wired, and includes
- standard 2" plated brass plumbing fittings for mounting into a holding tank. A full-size template is supplied to properly locate fitting holes.
- QUALITY
- The following features assure the finest performance for years to come:
- Every Hatco FR is equipped with an ECO (Energy Cut-Off ) wired into the
- electrical circuit. This built-in protection “breaks” the power to the elements if the temperature of the water goes above the normal thermostat setting.
- FR models feature a stainless steel tank with a five-year limited warranty.
- An optional low-water cut-off is available to prevent element burn-out
- due to a low water condition.
- The Hatco FR has separate sump and heating compartment drains for cleaning and sanitizing
- FOOD RETHERMALIZING REQUIREMENTS
- NSF Standard 4 has added performance requirements for food rethermalizing. The requirements mirror
- the requirements for food rethermalizing in the FDA Food Code. The basic requirement is that food
- reaches a temperature of 165°F (74°C) in a time period of two hours or less.
- Appliances that are manufactured for the purpose of rethermalizing food will need to meet these
- performance requirements in order to be listed to NSF Standard 4.
- Hatco sells a heating unit specifically made to be used for food rethermalizing, however, the heating
- unit is designed to be incorporated into a hot water bath rethermalizer. Hatco does not supply the vessel
- that contains the water, nor the system which determines how food is placed and held in the vessel.
- The Hatco FR unit simply attaches to the bottom of the vessel and supplies hot water to the vessel.
- Hatco does supply sizing recommendations to enable the appliance manufacturer to correctly size the
- FR unit to the vessel. However, there are variables in the way that the vessel is manufactured that affect
- its ability to pass the NSF performance requirements. The Hatco FR unit is listed with NSF for
- construction only. Due to the fact that the FR is only a portion of a larger system, it is impossible to do
- performance testing until the FR unit is incorporated onto the water vessel.
- The result is that it is the responsibility of the vessel manufacturer to have the entire rethermalizing
- appliance tested and listed in accordance with NSF Standard 4. Simply hanging an NSF listed FR unit
- on the appliance does not transfer NSF listing to the entire appliance.
- Manufacturer: Hatco
- Model: FR-9
- Weight: 27 lbs.
view
One (1) Year Parts and Labor PLUS Four (4) Years Parts-Only Warranty on pro-rated terms that Hatco will explain at Buyer’s request